We are searching data for your request:
All hoovers and vacuums will stop sucking up dirt at some point. With a Dyson, there are a few simple steps that you should follow to make sure it works properly. Ideally, these things should be done regularly, once a month or so, but in reality we tend to do them only when we notice the hair and fluff has remained on the rug.
Before you rush your machine to a repair shop, try cleaning the roller and filters first to see if you can do it yourself and save time and money. You will be surprised how well these simple things can work. Below, you'll find out how.
The first place to look when your Dyson stops picking up dirt is the roller. If the engine is still working properly and suction seems to be fine, then the roller is possibly the culprit.
My Dyson wasn't picking up because the roller was completely clogged with hair
After cleaning up the roller and brushes, the next step is to check the filters. Most vacuum cleaners will have at least one filter that needs maintaining as it will get full of dust and stop sucking so well. Some will be filters that just need throwing out and replacing with a new one, but the Dyson range has filters which are reusable. These need to be washed and dried before putting them back in place.
My model has two filters. One is underneath the dust barrel/bag and the other one is beside it. They are easy to remove once you know where they are. Take a look at the pictures below so you can locate them and see how they are removed.
Once you have these filters out of the vacuum cleaner, wash them in hot water with a little soap. The water usually runs dirty at first, but once the filter is clean, the water should run clear. Makes sure you let the filters dry completely overnight before putting them back in place. The Dyson filters are made up of several layers and need to be dry all through. Electricity and water are a dangerous combination.
One filter is underneath the dust bag/container
These simple things should be done once a month so that your cleaner doesn't lose its suction power. Doing often like this means it should only take 10 minutes of time. At the very least, you should carry these things out as soon as you notice that your appliance is not being as efficient as usual.
After a few years of use, you should replace the filters to keep the Dyson working efficiently. It is worth purchasing genuine parts, even though they are more expensive because they fit properly and will last a lot longer. My cleaner was much improved when I replaced mine recently. It is much cheaper than buying a complete new vacuum cleaner.
© 2017 Susan Hambidge
FlourishAnyway from USA on January 04, 2017:
Glad you got your working again. You're really handy when it comes to fixing and problem solving. I bought an expensive nice vacuum and the motor blew twice so now I'm back to the cheaper models I can fix myself or easily replace. The Dyson was so terribly loud I decided against brand. Didn't want to scare the cats.